YRKS series 6KV 10KV three-phase asynchronous motor is a wound rotor three-phase asynchronous motor, which protection is IP44 54, and the cooling method is air-cooled IC81W They are applied in dragging hoists, rolling mills, wire drawing machines, etc
Frame number: 355~630 Rated voltage: 6kv/10kv Rated frequency: 50HZ Speed: 1500rpm, 1000rpm, 750rpm, 600rpm, 500rpm Power range: 220~2500KW Installation type: IMB3 Protection class: IP44/IP54 Cooling method: IC81W Insulation class: Class F Air temperature: -15°C~40°C Highest average relative humidity: 90%; meanwhile, the average minimum temperature in the month is not higher than 25°C.
Motor Introduction YRKS series high voltage 6KV/10KV three-phase asynchronous motor (6KV center height 355~630, 10KV center height 400~630) is a wound rotor three-phase asynchronous motor. The motor is produced according to the technical conditions of JB/T10314.1-2002. This series of protection is IP44/54, and the cooling method is air-cooled IC81W. Motor Advantages This series of motor can provide a larger starting torque at a smaller starting current; it has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, easy installation and maintenance. Application Fields Applicable to the feed line capacity is not enough to start the squirrel-cage rotor motor, a longer starting time and more frequent starting, speed and other occasions within a small range. Such as dragging hoists, rolling mills, wire drawing machines, etc. Work environment requirements Not available in the following environments: The air is free of corrosive gas such as acid and alkali Explosive gas More dusty work environment Notice: 1) Belting driving is not allowed on the motor of 2 poles and 4 poles. 2) Belting driving applied on the motor of other poles, should be negotiated with manufacturer.