Xi'an Lite simo motors: TDMK large three-phase synchronous motor for mine mill

      Xi'an Lite simo motors TDMK large three-phase synchronous motors for mine mills are suitable for working in indoor environments where the altitude is not more than 1000m above sea level, the temperature of the cooling medium is not more than 40℃, there is little dust, and there is no corrosive gases, such as vapour, acid and alkali.

      The rated voltage of this series of motors is 6000V, 3000V and 10000V are also available according to the requirements of the users. the permissible voltage deviation range is ±5%, the rated power supply frequency is 50Hz, and the rated power factor is 0.9 (overrun).

      The motor has a cylindrical shaft extension end, and its rotating direction should be rotated according to the direction specified in the index plate, and the rotating direction is generally counterclockwise when viewed from the end of the collector ring, and it can also be made clockwise according to the requirements.

      When the motor and mill are coupled with shaft coupling, the motor shaft extension should not bear external radial or axial force.

      The excitation system of this series of high-voltage motor adopts silicon controlled excitation device.

      Xi'an Lite simo motors TDMK large three-phase synchronous motors for mine mills are allowed to start directly at full voltage. If the user's power grid does not allow full-voltage direct starting, reduced-voltage starting can also be used, at which time, the starting current of the motor decreases in direct proportion to the terminal voltage, while the starting torque decreases in direct proportion to the square of the terminal voltage.

      Stator lead wires: there are six lead wires, labelled U1, V1, W1, U2, V2, W2, which are led by high-voltage rubber cable wires on the lower outlet clamps of the machine base.

      Seat bearings: oil ring bearings, or composite bearings, seat bearings mounted on the base plate between the pad with insulating pads to prevent the generation of shaft current.

      The above information about Xi'an Lite simo motors TDMK(TM) high voltage synchronous motor for mine mill is provided by the technical department of Xi'an Sigma Motor, and the network department is sorted and released, and we welcome all new and old customers to inquire and purchase!